PRO-FIT GENERATION–2

The backrest has been designed to provide complete spinal support through its flexible central spine with 11 symetrical dynamic support strips which move with the user to support their back muscles.

The spine can be height and curve adjusted by lifing and lowering the finger pulls at the base of the back. 

Pro-Fit G2 has been designed with an open shoulder section to ensure that the mesh upholstery provides the correct aount of resistance to the user's upper back. This reduces hard pressure points which could otherwise cause discomfort, especially when reclining.

To release the back recline, push the single lever backwards. This puts the chair in free-float mode. When tension control is correctly set up, this allows the user dynamic movement when seated. 

To lock the backrest in recline position, return the lever to its neutral postion. 

Pro-Fit G2 features a dual auto-tension and recline tension adjustment. Its weight-activated mechanism auto-adjusts to each user's weight, which can then be manually adjusted by the user to increase or decrease the tension to their own preference,

The tilt tension function controls the speed and smoothness of the chair's reclining motion. Rotate the tension knob to increase or reduce the resistance of the backrest in recline mode until the backrest supports the user's weight but also allows it to recline when leaning back.

An integrated lumbar system delivers full support to the the lower back region. 

Pro-Fit's lumbar system delivers full scarum support to users in any sitting postion and when reclining. The tracking system ensures that the lumbar is perfectly positioned even when reclining which also prevents annoying drag on shirts and tops.

Seat height can be adjusted using the single lever located under the seat at the right of the chair. Lift the lever to rasie or lower the seat. Push lever back down to lock seat in place.

Aim to have your feet flat on the floor comfortably to ensure healthy posture.

Pro-Fit G2 features a seat depth roll which enables users to adjust seat depth without changing the seat and back position.

The  forward seat tilt sychronises with the back for comfort (2º seat with 6º backrest). To release the forward tilt, unlock the back recline using the single lever on the right of the chair, then use the rear lever on the left side of the seat to tilt the seat forward.

This feature enables a fit that is tailored to the user's specific needs. and can alleviate back strain. In addition, a forward seat tilt promotes healthier posture and enhances blood circulation to the feet, back, and legs.

The sloping, rounded front edge of the seat is designed to reduce pressure off the user's thighs when seated and improves blood flow in the legs.

Mirus G2 has lockable height, angle, width, depth and front tilt armrest adjustments, complete with a soft PU pad for comfort. The G2 feature a tiltable from armpad which is especially supportive for users who recline and hold tablet or mobile devices.

Properly set-up armrests provide support for your arms, wrists and hands and help alleviate muscle tension that can arise when arms and hands are not in optimal alignment.

• Lift the armrests to adjust height. Raising to the top will release the lock to drop their lowert level again.
• Push the armpad forwards or backwards to set arm depth.
• Push the armpads out or in to set arm width position.
• Turn the armrests left to right to set angle.
• Bend the front section of the armpad up or down to support the forearms.

Pro-Fit's headrest offers multi-dimensional adjustment. With angle, tilt, and double height adjustment available to ensure that every user can find the perfect position for proper neck and cranial support.

A superb addition for the user who likes to recline in their chair. The mesh legrest delivers ulimate comfort and helps alleviate fatigue and can relieve pain in the feet, ankles, knees, and thighs.

The optional legrest folds neatly under the seat when not in use.